edited DNSI, and DBW10, and added a new page

This commit is contained in:
TristanAncelet 2021-02-09 16:43:25 -06:00
parent c5aca69ba6
commit 4287830f5a
3 changed files with 77 additions and 25 deletions

View File

@ -6,25 +6,22 @@ connectivity issues.
## Issues ## Issues
1) DNS 1. DNS
Has issues with resolving domain names (ex: google.com) - Has issues with resolving domain names (ex: google.com)
2) Connectivity 2. Connectivity
Has trouble with even connecting to outside servers - Has trouble with even connecting to outside servers
## Network Managers Installed ### Network Managers Installed
- iwd - NetworkManager
- NetworkManager - wpa_supplicant
- wpa_supplicant
- netctl
## DNS services installed ### DNS services installed
- dhcpcd - dhcpcd
- systemd-resolved - systemd-resolved
## Information Gathered ## Information Gathered
-----------------------
When using systemctl and systemctl status to check the behaviors of dhcpcd and systemd-resolved I found that one of the possible problems is that my device is changing M.A.C and IP addresses about every 4-5 minutes. When using systemctl and systemctl status to check the behaviors of dhcpcd and systemd-resolved I found that one of the possible problems is that my device is changing M.A.C and IP addresses about every 4-5 minutes.
@ -38,23 +35,18 @@ to ping a server using the domain name. When I tried originally the message "pin
or Service is not known" was returned. or Service is not known" was returned.
## Research ## Research
-------------
Using my phone, I decided to search about the issues on forums to see if I could find a solution. Using my phone, I decided to search about the issues on forums to see if I could find a solution. During this search I found [this post][post] that discussed having a simmilar issue to mine.
The following pages are ones that I've visited:
- https://bbs.archlinux.org/viewtopic.php?id=237074&p=7
Here the issue that the poster mentioned having was simmilar to that of mine. However it
## Later Discoveries (updated: 1/22/2021) ## Later Discoveries (updated: 1/22/2021)
-----------------------------------------
I figured out the issue, but haven't had the time to update this. I figured out the issue, but haven't had the time to update this.
I eventually found out that the service dhcpcd was where I was having my issues, as when I found out how to configure iwd to take on the DNS duties I no longer had I eventually found out that the service dhcpcd was where I was having my issues, as when I found out how to configure NetworkManager to set to give systemd-resolved the DNS duties. After doing this I no longer had issues.
issues.
In my NetworkManager config file I configured it to stop randomizing my mac so much. All that was left was to solve my constant MAC randomization.
In my NetworkManager.conf file I configured it to stop randomizing my mac so much.
#This allows it to Randomize My MAC #This allows it to Randomize My MAC
@ -71,3 +63,17 @@ After doing a bit of digging I found that this config file for **iwd** alowed it
# This allows iwd to take over DNS duties # This allows iwd to take over DNS duties
[General] [General]
EnableNetworkConfiguration=true EnableNetworkConfiguration=true
### Packages
- [NetworkManager][NetworkManager]
- [dhcpcd][dhcpcd]
### Sources
- [Post Mentioned Above][post]
[post]: https://bbs.archlinux.org/viewtopic.php?id=237074&p=7
[dhcpcd]: https://wiki.archlinux.org/index.php/Dhcpcd
[NetworkManager]: https://wiki.archlinux.org/index.php/NetworkManager

View File

@ -7,7 +7,6 @@ This will depict the methods I used dual[tri]-boot my linux install with windows
My Partitions are as followed (sda being what the hard-drive is referred to by fdisk -l) My Partitions are as followed (sda being what the hard-drive is referred to by fdisk -l)
### sda [300 GB (I plan to upgrade to 1 TB soon)]: ### sda [300 GB (I plan to upgrade to 1 TB soon)]:
----------------------------------------------
| Partition | Use | Size | Notes | | Partition | Use | Size | Notes |
| :---------: | -------------------------- | ------ | -------------------------------------------------------------------- | | :---------: | -------------------------- | ------ | -------------------------------------------------------------------- |
| sda1 | EFI partition | 500 MB | | | sda1 | EFI partition | 500 MB | |
@ -18,12 +17,15 @@ My Partitions are as followed (sda being what the hard-drive is referred to by f
| sda6 | Extra storage for windows | 70 GB | Will Probably merge this with the windows partition at a later date. | | sda6 | Extra storage for windows | 70 GB | Will Probably merge this with the windows partition at a later date. |
--------------------------------------------------------------------------- ---------------------------------------------------------------------------
## Configuring the Grub bootloader ## Configuring the Grub bootloader
----------------------------------
### Adding it to Grub ### Adding it to Grub
- After installing Windows 10 I booted back into Arch and used the package update-grub to automatically detect the ".efi" files for each install and configure grub to - After installing Windows 10 I booted back into Arch and used the package update-grub to automatically detect the ".efi" files for each install and configure grub to
add it to the list of bootable OS's. add it to the list of bootable OS's.
### Setting Arch as my Default ### Setting Arch as my Default
- I downloaded the "grub-customizer" package to push Arch to the top of the list, so I didn't have to hurry and select it every time I boot up my PC. - I downloaded the "grub-customizer" package to push Arch to the top of the list, so I didn't have to hurry and select it every time I boot up my PC.

44
MovingToNewSDD.md Normal file
View File

@ -0,0 +1,44 @@
# Moving to a new 1 TB SSD
## New SSD
| | |
|:-------:|---------------------------------|
|Name | SanDisk SDSSDA-1 |
|Capacity | 1 TB |
|Datasheet| [link to pdf][product datasheet]|
## Partition Sheme
| Partition # | Filesystem | Size | Notes |
|:-----------:|------------|--------|-------|
| 1 | EFI | 500 MB |This is my bootloader partition for both Windows 10 and Arch
| 2 | ext4 | 100 GB | This is the boot partition for my linux install
| 3 | ext4 | 200 GB | This is the "\home" directory for my linux install
| 4 | NTFS | 200 GB | This is the boot partition for my Windows 10 install
| 5 | NTFS | 16 MB | Not sure what this one is for, Windows made it during installation
| 6 | Fat32 | 30 GB | This is my "Universal" storage, a partition that functions as a place to store any files that I need/want to move between my installs
## Process
Following a [tutorial][youtube tutorial] to brush up on how to install Arch I:
- Using [fdisk][fdisk] I made a new [GPT](https://en.wikipedia.org/wiki/GUID_Partition_Table) partition table and made:
1. The [EFI](https://en.wikipedia.org/wiki/EFI_system_partition) partition for the bootloader
2. The root ( / ) partition for my linux install
3. The home partition ( /home ) for the install
4. An empty [Fat32](https://en.wikipedia.org/wiki/File_Allocation_Table) partition for my Windows install I planned to do later
5. Made the "Universal" Partition to use as storage.
[fdisk]: https://wiki.archlinux.org/index.php/Fdisk
[youtube tutorial]: https://www.youtube.com/watch?v=a00wbjy2vns&ab_channel=LearnLinuxTV
[product page]:https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwj_g5bL6d3uAhVR8MAKHWMmAPUYABADGgJpbQ&ae=2&ohost=www.google.com&cid=CAASE-Ro2ajlV9YWBbY5zs2GY5YE8Es&sig=AOD64_0ZI4HdPjWaUiWvjzAr5l3gdaGnWg&ctype=5&q=&ved=2ahUKEwjC_Y3L6d3uAhUTQ80KHXFzBb0Q9aACegQIERBA&adurl=
[product datasheet]: https://shop.westerndigital.com/tools/documentRequestHandler?docPath=/content/dam/doc-library/en_us/assets/public/sandisk/product/internal-drives/ssd-plus-sata-iii-ssd/data-sheet-ssd-plus-sata-iii-ssd.pdf