README.md

@@ -26,6 +26,3 @@ This will allow you to restore a file on disk to the specific version that is st
 
 ### Get
 The utility will allow you to get the contents of a backup up file and have it output to the terminal.
-
-### Delete
-The utility allows you to delete entries/backups in the bucket if you choose to do so.

bucket-tool

@@ -11,15 +11,14 @@ require 'digest'
 # BEGIN: Helper Functions
 
 def usage
-  puts <<EOT
+  puts "#{__FILE__} [ACTION <arg>] [<flags>]
-#{__FILE__} [ACTION <arg>] [<flags>]
 
 Description:
-  This utlity is meant to be used to interact with & manage the filebucket in the same capacity as 
+  This utlity is meant to be used to interact with & manage the filebucket on P4 nodes due to the 
-  the builtin filebucket utility. However, it does not handle any puppet tie ins.
+  utility for that `puppet filebucket -l <action>` being nonfunctional.
 
-  I created this due to the puppet filebucket utility in my companies P4 envrionments not 
+  This implements the same functionality (minus the puppet tie-in) and will allow the user to 
-  functioning
+  search the filebucket and restore from it.
 
 Actions:
   search <term>             : Search for bucket entries matching a portion of the filepath
@@ -27,31 +26,11 @@ Actions:
   list-files                : List all files/paths that have been backed up to the bucket
   get <entry-hash>          : Get the content of a specific entry (by hash)
   restore <value>           : Restore previous state of file stored in bucket. Value can be hash or filename/filepath
-                             : Note: To restore to an alternate path you will need to provide the path via the -o flag
-                             :
   backup <file>             : Backup the file to the bucket
-  delete <hash>              : Delete the entry from the bucket
-
-Restore Flags:
-  -o | --output-file <file>  : Used to provide an alternate restoral path for the restore function
 
 Global Flags:
   -d | --debug              : Set debug flag
   -h | --help               : This help message
-  -b | --bucket <bucket-dir> : User specified bucket directory
-
-Listing Filter Flags:
-  --from-date <DATE>         : Filter listings from starting after this point (FORMAT: YYYY-MM-DD HH:MM:SS)
-                             : EX:
-                             : 1.  --from-date 2023-05-10
-                             : 2.  --from-date "2023-05-10 13:23"
-                             :
-  --to-date <DATE>           : Filter listings from ending at this point (FORMAT: YYYY-MM-DD HH:MM:SS)
-                             : EX: 
-                             : 1.  --to-date 2024-05-10
-                             : 2.  --to-date "2024-05-10 05:27"
-                             :
-
 
 Info Format Flags:
   -i | --inline             : Set the info format to inline (MTIME : HASH : FILENAME)
@@ -67,7 +46,7 @@ Author:
   Email: tristan.ancelet@acumera.com
   Phone (Work) #: +1 (337) 965-1855
 
-EOT
+"
 end
 
 def log (message, level = 0)
@@ -208,15 +187,11 @@ $CONFIG[:puppet_version]=` #{puppet_exe} --version `
 $CONFIG[:action]=""
 $CONFIG[:search_term]=""
 $CONFIG[:log_file]=""
-$CONFIG[:alt_filepath]=""
 $CONFIG[:info_format]="inline"
-$CONFIG[:from_time]=Time.at(0) # Beginning of epoch time
-$CONFIG[:to_time]=Time.now # Today
 File.open('/etc/hostname') do |file|
   $HOSTNAME=file.read().strip()
 end
 FLAG_REGEX=/^\-+\S+/
-DATE_REGEX=/^(?<year>[0-9]{4})-(?<month>[0-9]{1,2})-(?<day>[0-9]{1,2})[[:space:]]*((?<hour>[0-9]{1,2}):(?<minute>[0-9]{1,2}):(?<second>[0-9]{1,2}))?$/
 
 # END: Variables
 
@@ -236,7 +211,7 @@ if not (ARGV & ['-d', '--debug']).empty?
 end
 i=0
 case ARGV[i] 
-  when 'search', 'get', 'restore', 'backup', 'delete'
+  when 'search', 'get', 'restore', 'backup'
     $CONFIG[:action]=ARGV[i]
     log "$CONFIG[:action] was set to #{ARGV[i]}"
     log "user provided search action ARGV[i.next] == #{ARGV[i.next]}"
@@ -275,57 +250,6 @@ while i < ARGV.count
       $CONFIG[:info_format]='inline'
       log "$CONFIG[:info_format] was set to #{$CONFIG[:info_format]}"
       i+=1
-    when '-o', '--output-file'
-      log "user provided ARGV[i.next] == #{ARGV[i.next]}"
-      if ARGV[i.next] != "" and not ARGV[i.next] =~ FLAG_REGEX
-        $CONFIG[:alt_filepath]=File.expand_path(ARGV[i.next])
-        log "search_term was set to #{$CONFIG[:alt_filepath]}"
-        i+=2
-      else
-        puts "Flag[#{ARGV[i]}] : Argument[#{ARGV[i.next]}] : Either the argument was not provided or it was a flag"
-        usage
-        exit
-      end
-    when '-d', '--debug'
-      log "#{ARGV[i]} as specified, and the $CONFIG[:debug] flag was already enabled"
-      i+=1
-
-    when '-b', '--bucket'
-      log "user provided ARGV[i.next] == #{ARGV[i.next]}"
-      if ARGV[i.next] != "" and not ARGV[i.next] =~ FLAG_REGEX
-        $CONFIG[:bucket_dir]=ARGV[i.next]
-        log "$CONFIG[:bucket_dir] was set to #{ARGV[i.next]}"
-        i+=2
-      else
-        puts "Flag[#{ARGV[i]}] : Argument[#{ARGV[i.next]}] : Either the argument was not provided or it was a flag"
-        usage
-        exit
-      end
-
-    when '--to-date', '--from-date'
-      if ARGV[i.next] != "" and ARGV[i.next] =~ DATE_REGEX
-        date_matches = DATE_REGEX.match(ARGV[i.next]).named_captures.each_value.select{|val| not val.nil?}.map(&:to_i)
-        case ARGV[i]
-          when '--to-date'
-            $CONFIG[:to_time]=Time.new(*date_matches)
-            log "$CONFIG[:to_time] was set to #{$CONFIG[:to_time]}}"
-          when '--from-date'
-            $CONFIG[:from_time]=Time.new(*date_matches)
-            log "$CONFIG[:from_time] was set to #{$CONFIG[:from_time]}}"
-        end
-        i+=2
-      else
-        puts "Flag[#{ARGV[i]}] : Argument[#{ARGV[i.next]}] : Either the argument was not provided or it was a flag"
-        usage
-        exit
-      end
-
-    when FLAG_REGEX
-      # Catch all to prevent user from specifying a non-accounted for flag
-      puts "#{ARGV[i]} is not a valid flag."
-      usage
-      exit
-
     else
       i+=1
   end
@@ -337,11 +261,6 @@ if $CONFIG[:action] == ""
   puts "Action was not provided"
 end
 
-if not Dir.exist? $CONFIG[:bucket_dir]
-  puts "BucketDir[#{$CONFIG[:bucket_dir]}] Does not exist. Please check to make sure configuration is correct"
-  exit
-end
-
 case $CONFIG[:action]
   when 'search', 'get'
     if $CONFIG[:search_term] == ""
@@ -354,8 +273,6 @@ case $CONFIG[:action]
     if not File.exist? $CONFIG[:search_term]
       puts "File #{$CONFIG[:search_term]} does not exist. Please check to make sure that there are not typos and attempt the run again."
       exit
-    else
-      $CONFIG[:search_term] = File.expand_path($CONFIG[:search_term])
     end
 end
 
@@ -417,54 +334,6 @@ class BucketEntry
     end
   end
 
-  def delete
-    returncode = true
-    log "User has chosen to delete this BucketEntry"
-
-    Dir.chdir(@entry_dir){
-      log "Changed to #{@entry_dir} to delete children files"
-      Dir.children(@entry_dir).each{|file| 
-        log "Deleting #{file}"
-        if File.unlink(file)
-          log "#{file} deleted"
-        else
-          puts "There was an issue deleting #{File.expand_path(file)}"
-          exit
-        end
-      }
-    }
-
-    log "Deleting #{@entry_dir}"
-    if Dir.delete(@entry_dir)
-      log "Deleted #{@entry_dir}"
-    else
-      puts "There was an issue when attempting to delete #{@entry_dir}"
-    end
-
-    dir = @entry_dir
-
-    log "Beginning to delete trailing dirs unless one has children other than those that make up #{File.dirname(@entry_dir)}"
-    for i in 1..8
-      dir = File.dirname(dir)
-      log "Beginning to delete #{dir}"
-      children = Dir.children(dir)
-      log "Dir[#{dir}] children found to be #{children.join(',')}"
-      if children.empty?
-        if Dir.delete(dir)
-          log "Deleted #{dir}"
-        else
-          puts "There was an issue when attempting to delete #{dir}"
-          exit
-        end
-      else
-        log "#{dir} showed to contain another child directory. Not deleting and breaking loop"
-        break
-      end
-    end
-
-    returncode
-  end
-
 end
 
 class Bucket
@@ -490,12 +359,8 @@ class Bucket
     Dir["#{@bucketdir}/**/paths"].each.map{|path| File.dirname(path)}.each do |directory|
       log "\"#{directory}\" was grabbed from bucket directory. Making new BucketEntry"
       entry = BucketEntry.new(directory)
-      if entry.mtime <= $CONFIG[:to_time] and entry.mtime >= $CONFIG[:from_time]
       @entries[entry.hash]=entry
       log "BucketEntry[#{entry.hash}] was added to @entries Size=#{@entries.count()}"
-      else
-        log "Entry[#{entry.hash}] was filtered out by the user provided time constraints"
-      end
     end
     log "Bucket[#{@bucketdir}] was loaded"
   end
@@ -568,10 +433,6 @@ def get_entry_by_file (bucket, filenames)
     end
   end
 
-  if $CONFIG[:alt_filepath] != ""
-      return entry, $CONFIG[:alt_filepath]
-  end
-
   if filename[0] != '/'
     filename = "/#{filename}"
   end
@@ -582,12 +443,6 @@ end
 def get_entry_by_hash (bucket)
   if bucket.entries.has_key? $CONFIG[:search_term]
     entry = bucket.entries[$CONFIG[:search_term]]
-
-    if $CONFIG[:alt_filepath] != ""
-      log "$CONFIG[:alt_filepath] was set. Skipping prompts asking for filepaths"
-      return entry, $CONFIG[:alt_filepath]
-    end
-
     filepath = ""
     if entry.filepaths.count == 1
       filepath = entry.filepaths[0]
@@ -661,7 +516,7 @@ def backup_file (bucket)
 
   log "Created preceeding directorys to hash directory"
   dir=$CONFIG[:bucket_dir]
-  hash.chars[0,8].each{|char|
+  hash.chars[0,8].map{|char|
     dir+="/#{char}"
     log "Checking to make sure that #{dir} doesn't exist"
     if not Dir.exist? dir
@@ -706,26 +561,6 @@ def backup_file (bucket)
   puts "File #{$CONFIG[:search_term]} was backed up to #{entry_dir}"
 end
 
-def delete_entry (bucket)
-  if bucket.entries.has_key? $CONFIG[:search_term]
-    entry = bucket.entries[$CONFIG[:search_term]]
-  else
-    puts "BucketEntry[#{$CONFIG[:search_term]}] Does not exist. Please make sure you provided the correct hash value"
-    exit
-  end
-
-  puts "Corresponding Entry: #{entry.info}"
-  if get_verification "Are you sure you want to delete BucketEntry[#{entry.hash}]? " 
-    if get_verification "This cannot be undone. Are you sure you want to continue?: "
-      if entry.delete
-        puts "Ok. BucketEntry[#{entry.hash}] Has been deleted"
-      end
-    end
-  end
-
-
-end
-
 # END: Work Functions
 
 
@@ -752,9 +587,6 @@ if __FILE__ == $0
 
     when 'backup'
       backup_file bucket
-
-    when 'delete'
-      delete_entry bucket
   end
 
 end